§1.3 · The mod menu
Fine-tuning millisecond values
Hold Cross (PS) / A (Xbox) and tap D-pad Up or Down. Without Cross/A held, Up/Down only toggles On/Off.
01Purpose
Timing mods take a millisecond value. The value is how long the script holds the shot button (auto-greens) or how long the upward flick lasts (Button Rhythm). This is the number you will change most often.
02Control
- Open the menu (L2/LT + Options/Menu) and D-pad Left/Right to the page.
- Keep L2/LT held. Press and hold Cross (PS) / A (Xbox).
- Tap D-pad Up to raise the value, D-pad Down to lower it.
- Release Cross/A. The value is saved.
Pages with a millisecond value: Button Rhythm, Auto-Green (Standstill), Left Fade, Right Fade, Catch Shoot, Step Back, Step Delay, QS Pause, QS Delay, QS Shot.
03Range / Default
| Page | Range | Step | Default |
|---|---|---|---|
| Button Rhythm | 8–80 ms | 1 ms | 35 (center) |
| Auto-Green / Standstill | 300–900 ms | 5 ms | 660 |
| Left Fade | 100–1200 ms | 5 ms | 870 |
| Right Fade | 100–1200 ms | 5 ms | 820 |
| Catch Shoot | 100–1200 ms | 5 ms | 660 |
| Step Back | 100–1200 ms | 5 ms | 660 |
| Step Delay | 20–1200 ms | 5 ms | 150 |
| QS Pause | 0–1200 ms | 5 ms | 150 |
| QS Delay | 0–1200 ms | 5 ms | 150 |
| QS Shot | 100–1200 ms | 5 ms | 660 |
04Adjustment
For every auto-green the rule is the same: shot releases early → raise the value; shot releases late → lower it. Move in a few steps at a time and shoot a set of the same shot between changes.
Button Rhythm has no formula. Try fades and standstills at each value and keep what feels best.
Test in online MyCourt. Offline MyCourt timing is different from online and will send you to the wrong value.
05Notes
- Values persist on the Zen. They are saved to persistent variables the moment you change them.
- A new build from the Generator on yew.gg carries the values you set at generation. After loading it, check the menu before assuming your old values are in place.
- Full value table: 7.1 yew's Sept 3 values and 7.2 Ranges and defaults.